RAP Base Course is a recycled asphalt alternative to traditional base course materials.
- Recycled pavement used as a base course alternative, 100% perpetual product
- Over 2x the structural value of stone base per each inch of thickness.
- Free of dust and loose surface particles reducing airborne silica and trip/fall hazards
- High performing, lower cost, faster construction and safer for public use.
THE PROCESS – PROFILING
Profilers remove asphalt pavement that has exceeded its useful duration to prepare the area for a new surface. This old asphalt that was once destined for a landfill can now be recycled as RAP Base Course using Boh’s proven remanufacturing process. If you don’t have a site that requires profiling but still want to use RAP Base Course, don’t worry – Boh Bros. has extensive stockpiles that can be used.
DESIGN & MANUFACTURING
In Boh’s state of the art material testing laboratory, quality control personnel design the product to meet the material volumetric properties currently used for approved base course materials. The RAP Base Course is created with materials carefully controlled during receiving, fractionation, and processing.
With the latest technology and equipment, RAP is broken down to individual material sizes to create the same gradation requirements of traditional base course materials. Once the RAP is carefully graded through fractionation, the material is mixed through Boh Bros.’ asphalt plant, where it is reheated to a controlled temperature and blended to exact percentages with other additives to produce a product maximized for sustainability.
Using a technique known as warm mix processing, a small amount of water is introduced in the blending process to create a foam that increases the coating of the liquid asphalt onto the aggregates. This results in less energy consumption by the manufacturing plant and allows the RAP Base Course to remain at the adequate temperature for compaction for a longer period of time after placement.
Stringent quality control is undertaken from the time the RAP is received from the profiler until it leaves the site in the form of RAP Base Course and is compacted in place. Testing ensures that all three of these key steps are completed with consistency.
RAP Base Course can be placed in a high-volume capacity utilizing an asphalt paver or, in areas of limited access, with a bulldozer or motor grader. Immediately after placement, the product is compacted at the temperature set and monitored by a quality control technician. Once compaction is achieved and the product cools, the surface is fully functional, free of loose surface rocks, and ready for traffic on the same day it is placed.